54 lines
1.4 KiB
C
54 lines
1.4 KiB
C
/*
|
|
* serial.c
|
|
*
|
|
* This module implements the rs232 io functions
|
|
* void rs_write(struct tty_struct * queue);
|
|
* void rs_init(void);
|
|
* and all interrupts pertaining to serial IO.
|
|
*/
|
|
|
|
#include <linux/tty.h>
|
|
#include <linux/sched.h>
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
|
|
#define WAKEUP_CHARS (TTY_BUF_SIZE/4)
|
|
|
|
extern void rs1_interrupt(void);
|
|
extern void rs2_interrupt(void);
|
|
|
|
static void init(int port)
|
|
{
|
|
outb_p(0x80,port+3); /* set DLAB of line control reg */
|
|
outb_p(0x30,port); /* LS of divisor (48 -> 2400 bps */
|
|
outb_p(0x00,port+1); /* MS of divisor */
|
|
outb_p(0x03,port+3); /* reset DLAB */
|
|
outb_p(0x0b,port+4); /* set DTR,RTS, OUT_2 */
|
|
outb_p(0x0d,port+1); /* enable all intrs but writes */
|
|
(void)inb(port); /* read data port to reset things (?) */
|
|
}
|
|
|
|
void rs_init(void)
|
|
{
|
|
set_intr_gate(0x24,rs1_interrupt);
|
|
set_intr_gate(0x23,rs2_interrupt);
|
|
init(tty_table[1].read_q.data);
|
|
init(tty_table[2].read_q.data);
|
|
outb(inb_p(0x21)&0xE7,0x21);
|
|
}
|
|
|
|
/*
|
|
* This routine gets called when tty_write has put something into
|
|
* the write_queue. It must check wheter the queue is empty, and
|
|
* set the interrupt register accordingly
|
|
*
|
|
* void _rs_write(struct tty_struct * tty);
|
|
*/
|
|
void rs_write(struct tty_struct * tty)
|
|
{
|
|
cli();
|
|
if (!EMPTY(tty->write_q))
|
|
outb(inb_p(tty->write_q.data+1)|0x02,tty->write_q.data+1);
|
|
sti();
|
|
}
|